Infinity REFERENCE STANDARD RS 1 Manual de usuario descargar pdf (Pagina 5)

Reference Standard (RS 1, RS 2, RS 3) – Owner’s Manual

◆

URN

OWER

...

Figure 3. RS Series speakers feature color-

coded terminals. This example shows the

most common way of connecting speaker

wire by directly inserting into terminals.

Figure 4. Wiring diagram shows polarity

connections for one channel of a stereo or

home theater system.

MPORTANT

IRING

YSTEM

IMPORTANT: Make sure all equipment is turned off before making any connections.

For speaker connections, use #18 gauge speaker wire (or #16 for runs over 25 feet) with

polarity coding. The side of the wire with a ridge or other coding is usually considered negative

polarity (i.e.,

NOTE: If desired, consult your local Infinity dealer about speaker wire and connection options.

RS Series speakers have color coded terminals that accept a variety of wire connectors. The most

common connection is shown in Figure 3.

To ensure proper polarity, connect each

terminal on the back of the amplifier, receiver, or

television to the respective

(red) terminal on each speaker, as shown in Figure 4. Similarly,

connect the

(black) terminals in the same way. Also, see the owner’s manuals that were

included with your amplifier, receiver, or television to confirm connection procedures.

Do not reverse polarities (i.e.,

) when making connections. Doing so will

cause poor imaging and diminished bass response.

1 2 3 4 5 6 7 8

Sin comentarios

Infinity REFERENCE STANDARD RS 1 Manual de usuario Pagina 5